Gem Equipments (P) Ltd

S.F. No.103, Avanashi Road, Arasur, Coimbatore 641 407 Tamil Nadu, India

India , , -

About Us

Gem Equipments (P) Ltd., An Iso 9001:2008 Certified And The Largest Manufacturing Company Successfully Engaged Since 1984, Produces The Widest Range Of World Class Innovative Products Of Compressed Air Dryers, Compressed Air Treatment Accessories, Cooling

Super Pack Dryers

Gem Has Introduced The Amazing Technology In The Desiccant Dryers In The Name Of Spd (Super Pack Dryers). Its Occupies No Floor Space As It Is Wall Mounted. The Electronic Timer Enables Accurate Cycle Timing. There Is No Moving Parts And Hence High Relia

Refrigeration Industrial Chillers

Gem Has Launched The Industrial Chillers With Tube In Tube As Well As Plate Type Heat Exchangers For Efficient Heat Transfer Between Refrigerant And Water. The Heat Exchanger Is Of Coaxial Type, The Design Maximizes Exchanger Efficiency By Using Copper T

Bottle Cooling Tower

The Tower Casing Is Made Of Tough Fibreglass Reinforced Plastic (FRP) And Has Sufficient Structural Strength To Withstand High Wind Velocities And Vibrations. Uv - Stabilised Resin Is Used Along With Gel Coat For Longer Life. It Is Resistant To Local Imp

Refrigerated Air Dryer-RAD Series

Gem Equipments Limited Offers RAD Series Refrigrated Air Dryers. The Basic Principle Of Operation Of The Refrigerated Air Dryer Is The Removal Of Moisture By Cooling Air To Certain Present Temperature. There Is No Process Known For Producing Cold, There

Compressed Refrigerated Air Dryer-2KD Series

Gem Dryers Are Designed To Require Little Maintenance. Should Service Be Necessary, A Team Of Trained Technicians Is Available To Answer Your Questions About Installation, Operation And Maintenance Or Repair. A Complete Inventory Of Spare Parts Is Mainta

Compressed Air Filter

Gem Equipments Limited Gzf Series Compressed Air Filter. This Comprehensive Range Of High Efficiency Coalescing Filters Will Remove Oil, Dirt, Odour And Water From The Compressed Air Supply, Therefore Offering Complete Protection To All Equipment Instaled.

Dry Cooling Tower

Dry Cooling Tower Is An Equipment Which Is Used To Cool And Maintain The Temperature Of Process Hot Water At A Particular Level. This Operates On The Principle Of Heat Transfer By A Hear Exchanger With Extended Fins. The Fan Is Driven By An Electric Moto

Cross Flow Cooling Tower

The Gem Cooling Towers Is A Pioneering Product In Design & Manufacture Of Frp Cooling Towers In South India. We Are Continuously Striving To Offer Better Cooling Solutions To Customers, Which Are Both, Innovative And Also State Of The Art. Ect Is The Eva

Evaporative Coil Cooling Tower

The Gem Cooling Towers Is A Pioneering Product In Design & Manufacture Of Frp Cooling Towers. We Are Continuously Striving To Offer Better Cooling Solutions To Customers, Which Are Both, Innovative And Also State Of The Art. Ect Is The Evaporative Coil C

Square Cooling Tower

Sufficient strength to withstand high velocities and vibrations.Evaporative (FRP) Cooling towers are of vertical induced draft counterflow design with uniform water distribution and optimal heat transfer. Towers can be installed independent of wind direction.The tower casing is made of tough fibreglass reinforced plastic (FRP) and has sufficient structural strength to withstand high wind velocities and vibrations. UV - stabilised resin is used along with gel coat for longer life. It is resistant to local impacts and even if slight damage occurs, local repairs can easily be done. The portion of casing housing fill and eliminator has a round cross section. The water collection sump, also of FRP, is leak proof & avoids water spillage.

 

Modular Cooling Tower

The tower casing is corrosion-free and lightweight. Evaporative (FRP) Cooling towers are of vertical induced draft counterflow design with uniform water distribution and optimal heat transfer. Towers can be installed independent of wind direction.The tower casing is made of tough fiberglass reinforced plastic (FRP) and has sufficient structural strength to withstand high wind velocities and vibrations. UV - stabilized resin is used along with gel coat for longer life. It is resistant to local impacts and even if slight damage occurs, local repairs can easily be done. The portion of casing housing fill and eliminator has a round cross section. The water collection sump, also of FRP, is leak proof & avoids water spillage.


 

Double Cross Flow Cooling Tower

The tower casing is corrosion-free and lightweight. The double cross flow cooling tower operates according to the cross flow principle. The cooling tower is manufactured using FRP with a stainless steel supporting structure. The water is collected in a flash box for equal distribution and then it is recirculated once it collects at the bottom in the basin. The casing of the tower is extremely strong and it can withstand velocities and strong vibrations.The motor has a totally weather proof IP-55 degree of protection, suitable for hot and humid atmosphere and it is covered by FRP motor cover.Readily adaptable to any water cooling applications, these cooling towers are specially designed for hard water, ceramic industries, steel industries, oil refineries and dusty atmospheres. It is highly acclaimed by clients for chemical and corrosion resistance, maximum service life and high performance.

Aqua Saver

The aqua saver is built with corrosion resistant aluminium sheets. The casing is divided into baffles and fan sections, to ensure proper air distribution through the coils and maximize efficiency at part loads. The copper tubes and aluminium fins facilitate maximum performance. Main applications are as follow: Water Cooled Compressor Cooling .Hydraulic Power Pack Cooling.Plastic Injection Moulding Machine Cooling .luminium Die Casting Machine Cooling .Induction Furnace Coil & Electrical Control Panel Cooling

 

Moisture Separator

Designed to provide 99% effective moisture separation . Main Features are as follow: Compact Size Light Weight .Zero Maintenance .Float type Auto Drain Valve .Easy to Operate .Most effective separation of water and oil .Non corrosive Alumnium body construction .Sight glass for visually checking moisture collection .All air contains moisture in the form of water vapour. This water vapour begins to condense into condensate in the compressed air system when the air cools to saturation point. When this compressed air is used in the manufacturing plant, the moisture causes problems such as washing away of lubricants, increasing wear and tear, rust formation, corrosion etc. The easiest and permanent solution for moisture removal problem is the provision of a vortex separator.


 

Automatic Drain Valve

Designed to drain sludge and rust laden condensate in compressor room equipment and pipeline.salient features are as follow: Zero Air Loss .No Electricity and Noise .Robust Design Manual Discharge .Cleanable Orifice.Float type .The offered product is designed to drain sludge and rust laden condensate in compressor room equipment and pipeline. The digital electronic circuitry is encapsulated in high-grade resin for absolute time control. The valve comes with settings which gives the power and drain status indicator. It also has a waterproof IP 55 enclosure for suitable outdoor installations.

 

Compressed Air Receiver

Compressed Air Receiver helps to  Store compressed air.  Condense and trap the moisture in the compressed air and to let the impurities settle down before air passes into the piping. Equalise pressure variations in the pipe.    Prevent short cycle loading and unloading of the compressor.Gem air receiver are dimensioned to suit the compressor flow rate, the regulating system, the working pressure and the expected variations in the air consumption.

 

Water Cooled Cooler

Designed to drain sludge and rust laden condensate in compressor room equipment and pipeline. Main Features are as follow: Option of TEMA C/Std. Engineering Practice design .Comparatively low Power Consumption .Less impact of ambient in the outlet temperature .Vertical and horizontal models available .Dryers are sized according to the flow, pressure, temperature and dew point required of the compressed air. If these conditions are changed, the resulting efficiency of the dryer can be drastically affected. The temperature of the compressed air leaving a compressor varies from 82 °C to 177 °C, depending on the type of compressor, it is essential that an After Cooler be installed upstream of most dryers because it will lower the temperature to required level and will remove 50 to 75% of water vapour contained in the air. After coolers are available in either air or water cooled units.

 

Air Cooled Cooler

Designed to drain sludge and rust laden condensate in compressor room equipment and pipeline.Salient Features:Work pressure - 16 bar Heat exchanger is fully enclosed. Compact Size. Low power consumption .Easy for installation .Corrosion resistance painting .High Efficiency copper tubes. Optional Vortex Separator for 99.99% moisture removal. Continuous duty motor with Aluminium / highly reliable plastic fans. Most suitable for portable applications. Dryers are sized according to the flow, pressure, temperature and dew point required of the compressed air. If these conditions are changed, the resulting efficiency of the dryer can be drastically affected. The temperature of the compressed air leaving a compressor varies from 82 °C to 177 °C, depending on the type of compressor, it is essential that an After Cooler be installed upstream of most dryers because it will lower the temperature to required level and will remove 50 to 75% of water vapour contained in the air. After coolers are available in either air or water cooled units.