Al - Ameen Enterprises

No.28 Strand Road, Ground Floor, Near Marshall House

India , West Bengal, Kolkata - 700001

About Us

Established in the year 1987, we “AL - Ameen Enterprises” are the prominent supplier, trader, retailer and distributor of Hydraulic Products.. The range we offer under this category includes Yuken India ltd., Hydax hydraulics, Hydromatik, Tucson hydrocontrols, Abb, Sainest, Bhagwati, Spradow, Ponar wadowice, Wandfluh, Tiwac, Hydrocontrols, Winde, Badestnost, Demcon, Tiva, Danfoss, Teccon, Tranter to name a few. In addition, we also undertake reliable services for the offered products. The product range we offer are designed and developed by the expert engineers and technicians highly in accordance with the set industrial standards and norms. For gaining maximum client satisfaction, we source all the offered products from the reliable and trusted vendors of the market. Further, our quality inspectors strictly examine the entire procured range under several industrial standards to eliminate any chance of defect and ensure flawless functioning for a longer period of time. We make use of quality tested packaging material in packing the offered products which helps in maintaining original characteristics of the offered products.

Tucson Hydrocontrols ( Pressure Sequence Valve 1PSC100 )

These pressure reducing valves are reckoned in the market for tensile strength, dimensional accuracy and long functional life.
Pressure reducing valves are normally open valves that are used to maintain constant downstream pressure lower than the inlet pressure. Ideal for use in two systems or to protect low pressure actuators such as brake cylinders or clamping cylinders.
High capacity of pilot operated design. Cartridge construction for ease of installation into customer's manifold. Match ground assembly assure a long and trouble free working life

 

Overcentre valves

 Overcentre valves give static and dynamic control of loads y regulating flow into and out of hydraulic actuators. The overcentre valve will stop the load from running away in the event of a hose burst. If open centre directional control valves are used, they will allow the thermal expansion relief of the hydraulic fluid. These valves provide excellent hose burst protection. The check section allows free flow into the actuator (from 2 to 1) then holds and locks the load against movement  (from 1 to 2). The pilot pressure in the pilot port (3) will give a controlled movement to piston when the pressure is  applied. The pressure required to open the valve and allow movement depends on the pilot ratio of the valve. For optimization of load control and energy usage, a choice of pilot ratios can be made available. The pressure required to open the valve and start actuator movement can be calculated as follows:Pilot Pressure = (Relief Setting) - (Load Pressure) Pilot Ratio.

Hydraulic Flow Controls

A superior quality range of Flow Controls. These products are used for free flow in one direction and controlled flow in the reverse. To indicate the number of complete turns of opening, the controller is fitted with a micrometer adjustment for adjusting the throttling service our provision of colored rings. The offered products are also tested on various parameters so as to ensure their adherence with set industry standards and norms.

Direction Control valves

A wide range of Direction Control valves. The valves offered by us are widely used in hydraulics systems for directing fluid's flow in the required direction and location in the circuit. Designed with high precision, these valves are manufactured using high-grade raw material and latest technology. Owing to their features like high utility and extreme robustness, these valves are widely demanded by the clients.

Pressure control valves

A superior quality range of Pressure Control. The valves offered by us are ideal to control different types of fluids. These valves open in proportion to the rise in inlet pressure beyond set value. Designed using high-grade raw material, these valves are in adherence with the international standards and norms. These valves are also tested on various parameters so as to ensure their compliance with set industry standards and norms.

Filler Breather Assembly

Normal flange connection PCD 72mm (6 holes) and air Filtration to 40 microns. Comes complete with gaskets and mounting screws ready for assembly. Available options include tank side mounting adapter and threaded connection for breather assembly. Smaller sizes available. We have due to our focus on quality of products, customization, process and service levels, working with various well known companies belonging to industries like engineering, automotive and others. Seeing our large repertoire of clientele one can be assured for qualitative parameters and transparency in deals.

 

Gauge Isolator Valves

 A- Ameen Enterprises a coveted firm engaged in supplying, trading, retailing and distributing a comprehensive array of Gauge Isolator Valves. These zero leakage multi-station valves are widely used in various holding circuits for the accurate measurements and checking different pressures in hydraulic systems. Gauges are mounted separately and connected to the isolator with a pipe, the pressure is showed on the pressure gauge when the knob is turned to the selected position. We have installed a built-in detest to lock the knob on any of the selected positions.

Hydraulic In Line Filter

A- Ameen Eterprises customers can avail from an optimum quality range of In Line Filter at the industry leading prices. The offered products comprises of a filter head with screw-in filter bowls and built-in change-over valve. We offer the standard model with vent and drain screws and a connection for differential clogging indicator. These filters are ideal for achieving varied pressure compensation requirements by simply raising the change over level before switching it to the relevant filter side.

 

 

Fluid Level Gauges

 Al- Ameen Enterprises have gained international acclaim due to our strict qualitative parameters in the manufacturing of these products. The raw material we use is procured from some of the most renowned and reliable vendors and is stringently tested for quality before being used in the production process. Five sizes available. 76mm (3"), 127mm (5"), 178mm (7"), 254mm (10"), 355mm (14") between bolt centres. Optional temperature indication available. Suitable for mineral oils.

Rexroth Relief Valve

For subplate mounting:Porting pattern to DIN 24 340 form E,ISO 6264 and CETOP–RP 121 H,Subplates to catalogue sheetRE 45 064 (separate order)– For threaded connections– For installation in manifolds– 4 adjustment elements:• Rotary knob• Sleeve with hex. and protective cap• Lockable rotary knob with scale• Rotary knob with scale– 5 pressure ratings– Solenoid operated unloading vai a built-on directional spoolvalve– High performance solenoid– Explosion-proof solenoid (on request)– Switching shock damping, optional (only type DBW)

 

 

Swivel Banjo Connectors

 A wide range of Swivel Banjo Connectors. The fittings offered by us are used in automobile industries, chemical industries, ship building, mining and steel plants. Moreover, these products are designed in adherence with set industry standards and norms using high-grade raw material and latest technology. These are also tested on various parameters so as to offer a quality assured products to our customers.

 

Elastomeric Ferrule

 A- Ameen Enterprises are engaged in offering a wide range of Elastomeric Ferrule. The products offered by us are used for sealing all the joints of the 24 deg cone. Moreover, with the help of these products assure leak proof operation of the coupling without re-tightening under severe conditions. Our offered product is designed in accordance to 24 deg bite type standard like DIN 2353, IS 8805, ISO 8434-1. Additionally, this help in covering low and high pressure series.

Electric Motors

A high quality and reliable range of Electric Motors at the industry leading prices. We offer this range in standard and customized specifications for meeting the diverse industrial needs of the clients. Owing to the salient features like high tensile strength, exceptional performance, longer functional life and corrosion resistance, our products are highly preferred in the market. Our vendors have registered their presence in more than 140 countries across the globe with this highly reliable range of products.

 

Accumulator Safety Block

Tucson manufactures state of art safety blocks which are supplied to one of the leading international company. The system contains a ball shut off valve to isolate the accumulator and a drain valve to remove the oil from the accumulator. Relief valve protects the accumulator when the ball valve is in shut condition. Typical application is in steel mills.

Quick Release Coupling

Standard Series couplings are the simplest and most commonly used. Holmbury Standard Series are specifically designed to satisfy a wide range of applications and conform to ISO 7241 A and B parts standards ensuringworldwide interchangeability. Applications: Hydraulic tools for rescuing.Hydraulic tools for agriculture machines.Hydraulic tools for forestry machines.Hydraulic tools for earth moving machines.Hydraulic tools for road machines.Components in chemical plants.Components in charge plants for technical gases.Components in off-shore plants.Components in food industry plants.Temperature control systems for plastic and metal casting.Hydraulic components for industrial applications.Hydraulic systems for special vehicles.